Contact us: 0845 617 1498

Mix Digital Complete Satellite Finder Signal Meter Kit with Free Cable

£13.95 (as of April 24, 2017, 10:54 am)

Satellite signal meter with moving coil meter
Military style compass with fold down lid
Power attachment cable for the battery pack to power the LNB

Usually dispatched within 1-2 business days

When you have set the approximate position of the dish you can use the satellite signal meter to peak the signal and correct minor errors in your azimuth adjustment. The signal meter has a backlit display and an audible tone to assist alignment. The higher the tone the stronger the signal. Firstly though, the signal meter needs line power as the LNB will not function unless it has power. This is normally supplied by the satellite receiver via the dish feed cable, however there are two ways to power this meter. Use the line power of your receiver or use the external battery pack and battery power cable supplied. You will need 10 x AA batteries for this purpose. Alternatively Mix Digital recommend connecting the power lead to a 9v Battery instead. Using the battery pack will allow you to align a dish without the receiver being present and is also useful when aligning a dish when you have no access to the location where the receiver is or for aligning a dish before a satellite receiver is installed. The next stage is to connect the LNB to the signal meter using the supplied patch cable which has F connectors fitted at both ends. You will hear an audible tone from the meter but if not you need to slowly the move the dish left to right and up and down until you see a deflection of the meter needle and a hear this tone. The alignment procedure is a combination of obtaining a tone and then adjusting the sensitivity control on the meter to reduce the signal sensitivity. You then slightly alter the dish position to again peak the signal and eventually you will obtain the maximum signal strength possible. Finally tighten all bolts on the dish ensuring it does not move slightly when you do this.
Satellite signal meter with moving coil meter
Military style compass with fold down lid
Power attachment cable for the battery pack to power the LNB

Frequently Bought Together

Price for all: £42.84
Mix Digital Complete Satellite Finder Signal Meter Kit with Free Cable btn add to cart
Binding

Electronics

Brand

Mix Digital

EAN

5060267071262

EANList

5060267071262

Label

Mix Digital

Manufacturer

Mix Digital

MPN

MD-SATFINDERKIT

PackageQuantity

1

PartNumber

MD-SATFINDERKIT

ProductGroup

CE

ProductTypeName

TELEVISION

Publisher

Mix Digital

Studio

Mix Digital

Reviews


There are no reviews yet.

Be the first to review “Mix Digital Complete Satellite Finder Signal Meter Kit with Free Cable”